Specializing in the production of various

0769-88662686

语言:中文

> 主页 > News > Industry News >

Industry News

Carbon fiber heater which is a large high-temperature strengt

时间:2014-11-28 11:34来源:未知 作者:admin 点击:
Carbon fiber heater it is a strength ratio, the density of small steel than aluminum, but also corrosion resistant than stainless steel, heat-resistant than steel but also a high temperature, but also as conductive as copper, with many valu
  Carbon fiber heater it is a strength ratio, the density of small steel than aluminum, but also corrosion resistant than stainless steel, heat-resistant than steel but also a high temperature, but also as conductive as copper, with many valuable electrical, thermal and mechanical properties the new material. Carbon fiber and composite materials made of plastic made aircraft not only lightweight, but also consume less power, thrust, noise; carbon fibers computer disk, can improve the computer's storage capacity and computing speed; carbon fiber reinforced plastics manufacture of satellites and rockets and other spacecraft, high mechanical strength, low mass, can save a lot of fuel. Carbon fiber heater
 
  Currently, in 1999 occurred in the Kosovo war in Yugoslavia, NATO graphite bombs destroyed the majority of the electricity supply in Yugoslavia, the principle is to produce a wide range of areas covered by clouds of carbon fiber, the conductive fibers to make power system short-circuited.
 
  Carbon fiber is currently in the alternative heating material core heating element also has a new contribution to foreign countries, in many of the core heating element of energy-saving heating equipment has been gradually upgraded from the previous commonly used metal materials to the carbon fiber material, carbon fiber materials in the heating aspect of the main considerations use of corrosion-resistant materials, anti-oxidation (metal oxide easily cause local breakdown), high stability and longer life (a lot of products in general can reach 300 degrees Celsius stable work 100,000 hours of time), heat conversion rate (97 % or more) and so on. Because our research and development in the production of carbon fiber material is still in a relatively backward situation, high-quality carbon fiber material or rely on Japan and South Korea imported, so the price is high, but with the domestic joint venture, cooperation in the form of the emergence of carbon fiber as the core technology products have been into the ordinary consumer's home.
 
  Carbon fiber products in terms of the application of heating divided many forms, such as staple fibers, chopped fibers typically used on such "carbon crystal," "warm film" and other heating products, graphite products in the early heating film used widely, film products in addition to be used in the heating, water heater, industrial equipment, environmental protection thermostat application is very extensive.
 
  Currently carbon fiber heating products: for home heating systems to warm, dry shop class includes warm-chip products for wood flooring, wood flooring, PVC floor covering classes. Wet warm shop class products for tile and marble floors. There are suitable for the transformation of central air-conditioning duct heating effect products, more commonly after the transformation to burn oil burning electric auxiliary heat source for heating 30-50% energy saving way for the transformation of the newly installed air conditioning and air conditioning, simple, environmentally friendly energy, use low-cost installation costs. Yoga for engineering room, sauna, health beds, football and skiing snowmelt cable, solar heating cables.
 
  Carbon fiber heater heating system is a complete, standardized modern home electric heating system, mainly composed of carbon fiber heater thermostat (sensor) wire and other components, floor by floor coverings in indoor, according to pre-set indoor heating needs setting, the thermostat automatically regulated heating carbon fiber heating element, providing comfort, hygiene, health, convenience and economic heating energy.
 
  An excellent performance, the carbon fiber heating element
 
  Carbon fiber is a new high-performance fiber-reinforced materials with high strength, high modulus, high temperature, wear, fatigue, corrosion, creep resistance, electrical and thermal conductivity, and many other excellent performance. It can reduce component weight, thus improving the performance of component technology. Therefore, carbon fiber has a metal body as electric, PTC and other electric body excellent performance unmatched by many:
 
  1, rapid heating. Life can produce Guangyuan body needs infrared 8μm-15μm.
 
  2, high electric conversion efficiency, saving energy. Carbon fiber heating material body is a full black body, electric conversion efficiency increased by 30% over the metal heating, electric efficiency of about 100%.
 
  3, high tensile strength.
 
  Under the same allowable current load area, strength of the carbon fibers is 6-10 times higher than the wire, in the course of fracture does not occur, and therefore the tensile strength in the course of electric no change.
 
  4, can not afford to break the arc, effectively prevent fires.
 
  5, light weight, effectively reducing component weight, thus improving the performance of component technology.
 
  6, chemical stability (corrosion, less susceptible to oxidation). In the absence of oxygen is heated to 3000 degrees, its mechanical properties without any change in the state to overcome the electric wire, PTC, silicon carbide heating lower body strength, shortcomings easily oxidized blown.
 
  7, long life - carbon fiber heating element and buildings with life.

Address: Canal Road West too long Shatian
Dongguan City Industrial Zone on the 2nd

Arima Electric Co., Ltd., Dongguan City All rights reserved          Technical Support:麦田网络           Copyright ©1998-2014 hippsc.com, All Rights Reserved
Address: Canal Road West too long Shatian Dongguan City Industrial Zone on the 2nd  Phone: 0769-88662686 Fax:0769-88662681  Di Jingli:13751215457   Mr Wong:15818260671