Industry information

Carbon crystal heating using greenhouse should have reasonable heat insulation measures, far infrared heating plate can reduce indoor heat dissipating, effectively control the cost of heating system to run.

 

1 5 ~ 8 ℃ as the best equilibrium temperature, heating up each 1 ℃ will increase about 6% of the energy consumption. Cut 1 ℃ will reduce energy consumption by 7%.

 

1 5 ~ 8 ℃ near power right 25% of the maximum power of work.

 

Yuan to realize carbon crystal heating floor heating system after the completion of the acceptance, should be forbidden process after the construction personnel to use, set the shakedown insulation or other items covered.

 

Please do not use nails or weapon damage on the ground, to avoid damage to the low thermal layer wire and connected to the electrode caused leakage accident, keeping in good health carbon crystal surface damage not leakage or a fever.

 

All sorts of other accidents caused as a result of heating room large area ground water, also should immediately stop using this system, and processed for accident and ensure the water clean before using again.

 

Carbon crystal heating wall warm voltage 220 v + 30% fluctuations will not affect the use of this system, but may cause malfunction of the thermostat.

 

The system of the underground part of the service life is long, the working life of the thermostat see illustrations of the selected product.

 

Ground material when choosing carpet, should choose the carpet with good permeability, avoid to use pure hydrogen or airtight nylon carpet, etc.

 

(10) local warming system should avoid soaking by water, such as accidentally by water immersion, please cut off the system power supply and notify our service department or call phone repair service.

 

(11) of this system in laying the ground material should not be long before electricity, so as not to damage the system.

 

(12), when laid floor, please don't lay with aluminum foil layer of dampproof mat, lest affect heating effect.
 

PET polyester fever

 

PET electrothermal film polyester fever piece is in the middle of the two pieces of polyester film clip in a current-carrying article, conductive ink and special alloy by printing, heat sealing technology preparation together, formed its specific specifications, the thickness of 0.26 mm or so the resistance of the diaphragm, diaphragm by current heat emitted infrared formed after thermal radiation source, and the working temperature of 80 ℃ or less. Therefore, also known as: "warm card" of low-temperature radiant electrothermal film and light waves

 

Polyester hot piece of performance characteristics

 

1, the element USES high strength insulating materials - polyester film as the carrier, safe and reliable, never leakage;

 

2, components of far infrared radiation is strong, the work has 2-13 um far infrared wavelengths, with warm sunshine, beneficial to human health;

 

3, its light weight and thin, thickness of only 0.26 mm, is 1/10 of the conventional electric heating element;

 

4, element flexibility is good, suitable for all kinds of special-shaped and any concave and convex surface of the heating appliance;

 

5, element thermal conversion rate as high as 98, over 30% of energy than conventional heating elements.

 

The application of polyester hot slice

 

Low pet mat low smoke lampblack machine electric heating oil removal system low low electric tank insulation device therapy when low mist mirror aquarium heater

 

Polyester hot piece of technical indicators

 

1, electric strength: 1500 v / 1 min5ma, no breakdown flashover phenomenon;

 

2, the service life: 70 ℃ control WenGan burn 8000 hours or more;

 

3, power deviation: + / - 10%;

 

4, power density: film effective heating area (the power density has something to do with product use) 0.09 w/CM2. Forced cooling 1.5 W/CM2 or less;

 

5, power supply voltage: ac/dc;

 

6, element size: can be customized according to customer's request
 

Non-woven fever piece

 

Non-woven fever is paste hair hotline between the two pieces of non-woven fabric of a heating blanket components. The product of only 3 to 5 mm thickness, area from 10 cm to 4.0 ㎡, the work from 0.5 watts to several hundred watts, the highest working temperature of 150 ℃. It has a light, and simplicity of design and installation, the use of safety and health, the surface heat evenly, long life, low cost, can be arbitrary shape of the heated surface, and convenient design unique advantages, is a design of planar heating in low temperature applications ideal heating elements, are widely used in the bedroom in, car seat cushion, health care, food, heating, planting breeding heat preservation, etc.