The company dynamic

What are the ceramic heating chip parameters

 

1) : the temperature of heating speed, 7-10 seconds of 200 ℃, 500-700 ℃ for 30 seconds.

 

2) resistance: join rated voltage 10 minutes, after power measuring electric parts (lead) and the electric resistance and insulation between the electric parts: after the power is more than 1 m Ω, power cuts after 10 minutes: 100 m Ω.

 

3) resistance to voltage: 0.5 mACUT power supply, electric parts (lead) and the electric parts in AC3750V/between 0. 5 ma/by 1 SEC.

 

4) performance:

 

1, insulation resistance: more than 100 m Ω.

 

2, resistance to voltage: AC3750V / 0.5 mA/sce by 1.

 

Ω. 3, the early resistance: 30-225.

 

4, consumer power: 30-130 - w.

 

5) insulation resistance: not to join the power supply mode, electric parts of the electric heater (lead) and measuring insulation resistance between the electric parts, more than 100 m Ω due.

 

6) tension: will lead and ceramic chip with 3 KGF 1 minute in the opposite direction to pull through.

 

7) product appearance size (mm) :

 

Length * width * thickness: 70 * 7 * 1.2, 70 * 10 * 1.2, 70 x 15 x 1.2, 70 x 20 x 1.2, 30 x 1.2 70 x

 

8) working voltage: 110 v / 220 v / 50/60 hz

 

Heating tablets can heat water directly, but must ensure that the water can fully infiltrates heating tablets, and are not allowed to generate big bubbles in the heating surface, otherwise easy to cause heating local overheating and damage, the temperature of the water control in 75 degrees commonly, otherwise may heating surface fouling and cause damage